Although the Vögele 1900-3 asphalt paver is a durable and reliable machine, wear and damage can occur on its side panels over time. This damage not only results in an unpleasant appearance but can also affect the machine’s function. In this blog post, we’ll present a step-by-step guide to repairing the side panel of the Vögele 1900-3.
Materials Needed
- Screwdriver
- Solder wire
- Soldering iron
- Buttons
- Sticker
- Screen glass
- Paint (optional)
Repair Steps
- Using a screwdriver, remove the screws securing the damaged side panel and carefully take the panel off.
- Using the soldering iron, remove the faulty buttons and solder the new buttons neatly into place.
- Remove the worn sticker and screen glass, then lightly sand the casing with sandpaper.
- Clean the casing of dirt with a damp cloth and make sure it is completely dry.
- Paint the casing with spray paint in a warm environment.
- Once the paint has dried, install the new screen glass and sticker.
- Mount the mainboard and keypad back into place, then tighten the case screws with a screwdriver.
Vögele 1900-3 Side Panel Repair
Vögele 1900-3 Side Panel Repair
Helpful Tips
- Before starting the repair, disconnect the machine’s power supply and take all necessary safety precautions.
- Be careful of the mainboard, keypad, and screen when removing the damaged side panel.
- When painting, be sure to follow the instructions and use the appropriate type of paint.